바이크 핸들에 마땅한 공간이 없어서 핸드폰 거치대 고정할 브라켓과 인스타360을 거치할 곳이 필요했는데,이 제품으로 한번에 해결 되었습니다. 데이토나 제품은 항상 실망시키지 않습니다 설치는 5분 정도면 충분하고. 퀄리티 또한 부족함이 없습니다.
View Detail
Looks like you access from European region.
Would you shop at webike.eu.com?
- Instock
12.5 ~ USD (1,993 JPY)
Webike Point: +60~ pt
(0.37 USD)
Delivery Information
-
Please select product form first.
FITMENT
HONDA
-
glom
13 JC61 [Frame No.] JC61-1000001 to 1099999
-
CB400SF
12-21 NC42 [Frame No.]NC42-1400001 or later
-
CB400SF
14-21 NC42 [Frame No.]NC42-1600001 or later
-
CB400SF
95-21 NC31 Ver.R [Frame No.]NC31-1350001 or later
See all
HONDA
YAMAHA
-
MT-09
21 BAM8/8BL-RN69J
-
XSR900
16 [Frame No.]RN46J-
-
MT03
-
MT-25
20-21 G402E
SUZUKI
Open Fit Model Information Table
-
V STROM 650
23 8BL-C733M
-
DL1000 V-STROM250
17-21 2BK-DS11A
-
V STROM 250SX
23 8BK-EL11L
-
Gixxer 150.
20 2BK-ED13N
See all
SUZUKI
Product detail
Pipe diameter: Φ22.2
Effective pipe length: 55mm
Total length of bar section: 155mm (excluding cap part)
Height: 64.3mm
Compatible Handle Post Pitch: 60-110mm
Steel
[Set components]
Bar holder 1 piece
Color: 13 x 8.5 x 15L 2 pcs
Hexagon socket head cap screws: M8 x 45 2 pcs
Flat Washers: M8 2pcs
Multibar holder convenient for installation of devices around the hanelebar (navigation system, smart phone, ETC, radar, cigar socket, switch, etc.).
MODEL PAGE LINKS
HONDA
- APE50
- XR100 Motard
- CROSS CUB (CC110)
- CB125R
- CT125 Hunter Cub
- PCX125
- MSX125 (GROM)
- CB150R
- PCX160
- FTR223
- CB223S
- XL230
- HORNET250 (CB250F)
- CB250 JADE
- VTR250 (MC33)
- CRF250L
- FORZA-Si (MF12)
- CB400SF (Super Four)
- CB400X
- CB400F (2013-)
- CB400SB (Super Bol D'or)
- CB400SS
- CB500X (500X)
- CB650R
- NT700V Deauville
- NC700S
- NC700X
- NC750X
- CB1000R (2018-)
- CB1100 RS
- CB1300SF (Super Four)
- CB1300SB (Super Bol D'or, CB1300S)
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA 400X 13 NC47 ABS[Frame No.] NC47-1000001 or later, HONDA 400X 13 NC47 [Frame No.]NC47-1000001 and later, HONDA 400X 19-21 NC56, HONDA APE 50 01 AC16 [Frame No.]AC16-1000001 to 1099999, HONDA CB1000R 21 2BL-SC80
Installed on: YAMAHA XSR900
May 16, 2023
Helpful?
Fits:HONDA 400X 13 NC47 ABS[Frame No.] NC47-1000001 or later, HONDA 400X 13 NC47 [Frame No.]NC47-1000001 and later, HONDA 400X 19-21 NC56, HONDA APE 50 01 AC16 [Frame No.]AC16-1000001 to 1099999, HONDA CB1000R 21 2BL-SC80
Apr 23, 2022
The best inexpensive product of the many I have bought.
How was your experience with it?
I bought several of them and finally settled on this one.
The Mirror Bracket is already full, and adding more would make it impossible to reach the Mirror screws.
Mirror Bracket rejected.
At first I installed it facing forward, but then I learned that either direction is OK.
We decided to point it forward.
We wanted to keep the eyes in front of us as much as possible.
Most importantly, the installation is Bolt-tightened, so it will not move.
Bracket was a bit concerned about that.
Very Simple but very cosy product.
[Points to note]
Use Torque wrench to install.
Handlebar Clamp Bolt will be Large weird if you screw it off.
On the other hand, a loose handlebar will interfere with the fixation of the handlebar.
How did it compare to other products?
Cheapest and most stable.
Helpful?
Fits:HONDA 400X 13 NC47 ABS[Frame No.] NC47-1000001 or later, HONDA 400X 13 NC47 [Frame No.]NC47-1000001 and later, HONDA 400X 19-21 NC56, HONDA APE 50 01 AC16 [Frame No.]AC16-1000001 to 1099999, HONDA CB1000R 21 2BL-SC80
Sep 4, 2021
[How is it used?
Used for Navigation and fixing your phone when touring.
Was the one you received as per Image?
As per Image.
Was the installation difficult?
You only need to remove the Screw and install it, so if you have Hexagonal Wrench, it's a piece of cake. However, be careful of the overtorque of Screw tightening.
How was your experience with it?
You can choose 2Pattern with the bar at the front or at the back in the direction of installation.
[Included Parts:were they on?
Included Parts:Bolt and collar are all that is needed for a complete installation.
[Was there anything that disappointed you?
The surface of the bar is soft. The surface of the bar is soft (?), so once you install it tightly, it will leave a mark.
If you are worried about it, you might want to wrap it around the anti-scratch Seat.
Helpful?
Fits:HONDA 400X 13 NC47 ABS[Frame No.] NC47-1000001 or later, HONDA 400X 13 NC47 [Frame No.]NC47-1000001 and later, HONDA 400X 19-21 NC56, HONDA APE 50 01 AC16 [Frame No.]AC16-1000001 to 1099999, HONDA CB1000R 21 2BL-SC80
Apr 6, 2020
This would be perfect for the ZX-6R
I installed it on a ZX−6R 2020 MODEL
When Full Stare, it hits the Fork a little bit, so I had to shave off about 1mm of this product When I gave it to him, he stopped hitting it
I'm glad I bought it because it doesn't detract from the look!
Helpful?
Fits:HONDA 400X 13 NC47 ABS[Frame No.] NC47-1000001 or later, HONDA 400X 13 NC47 [Frame No.]NC47-1000001 and later, HONDA 400X 19-21 NC56, HONDA APE 50 01 AC16 [Frame No.]AC16-1000001 to 1099999, HONDA CB1000R 21 2BL-SC80
Aug 27, 2019
Purchased to install on the Kawasaki ZX-6R 2016MODEL, Tank's Bolt It was able to be installed without interference by co-tightening it to the It has a built-in USB power supply unit (sold separately) There is enough room for the integrated ETC, Smartphone Holder and Switch for fog It is
It is used with V-STROM1000 now, and there is no rust even after three years I am
Helpful?
Full Custom Build Inspiration
