Looks like you access from European region.
Would you shop at webike.eu.com?
98.75 USD (15,742 JPY)
Delivery Information
No inventory Information Acquired.
In order to place an order, please estimate from below.
YZF-R1
09-14 JPN 45B1|2|3|4|5|6 Man-hour(h)0.3
YZF-R1
10-11 CAN 14BH|N Man-hours(h)0.3
YZF-R1
09-14 JPN 45B1|2|3|4|5|6 M Man-hour(h)0.3
YZF-R1
04-08 AUS 5VY3|C|K|N M man-hours(h)0.3
[Manufacturer's part number] 90793-6730300
**This unit does not have an immobilizer function because it is linked with the immobilizer of the vehicle.
*For security reasons, YAMAHA cannot answer questions about wiring schematics, etc., please understand.
*Please refer to the compatibility chart for compatible vehicles..
●The alarm unit is specially designed for vehicles equipped with an immobilizer as standard.
●Convenient and exclusive type that works with the vehicle's immobilizer.
●When the key is not operated properly (direct connection to the wiring, destruction of the key, etc.) or the vehicle is shaken, a loud warning is issued.(Alarm function)
●The sensor sensitivity can be adjusted in three steps: standard 1, standard 2, and sensitive.
●It is designed for low power consumption to minimize the load on the battery.
●It is also available to set the alarm to "no alarm" mode, which is convenient when refueling or performing maintenance.
Reviews with image
Fits:YAMAHA Bolt 14-21 XVS950 CU JPN 1TP4 man-hour(h0.5), YAMAHA Bolt 14-21 XVS950 CU JPN 2CY1|2|3 Man-hour(h0.5), YAMAHA Bolt 14-21 XVS950 CU JPN 2DX6|8|E|F|N|P man-hours (h0.5), YAMAHA Bolt CSpecifications 15- (XVS950 CR) JPN B336 man-hour(h)0.5, YAMAHA Bolt CSpecifications 15- (XVS950 CR) JPN B339 man-hour(h)0.5
Jan 2, 2023
我的摩托车是YAMAHA MT07，由于经常需要把车停放在路边，为了防止车辆被盗窃，我需要安装一款报警器，之前在别的网站上看过其他品牌的，但是大部分需要破线或者给车辆打孔，我不喜欢这样的安装方式，所以我在webike上购买了这款原厂的报警器，无损安装，摩托车有预留的接口，直接对插就可以了，感应器有三种感应模式可以调整，车辆晃动，将发出响亮的警报声。
View Detail
Fits:YAMAHA Bolt 14-21 XVS950 CU JPN 1TP4 man-hour(h0.5), YAMAHA Bolt 14-21 XVS950 CU JPN 2CY1|2|3 Man-hour(h0.5), YAMAHA Bolt 14-21 XVS950 CU JPN 2DX6|8|E|F|N|P man-hours (h0.5), YAMAHA Bolt CSpecifications 15- (XVS950 CR) JPN B336 man-hour(h)0.5, YAMAHA Bolt CSpecifications 15- (XVS950 CR) JPN B339 man-hour(h)0.5
Nov 3, 2015
The installation time was 30 minutes, but it took around 1 hour to remove the Cover etc, remove the Battery cable, etc.. Connection and installation of Body is very easy. There is already a Harness in the Side cover and only connects, but since there is no connection Wiring diagram together, it was a bit difficult but it is nothing if it ends. I think that it is better that you go to Shop such as YSP and confirm the installation place and direction of Sensor by confirming it.
Because it is only handling Instruction Manual on packaging.
Review detail
