Looks like you access from European region.
Would you shop at webike.eu.com?
105.42 USD (16,805 JPY)
Delivery Information
This item is discontinued.
FITMENT
-
FAZE
09-12
-
FUSION
94-08
-
GSX-R750
04-05 HI side
-
GSX-R600
04-05 HI side
-
GSX1400
01-08
-
GSX1100S KATANA (KATANA)
81-00
See all
SUZUKI
-
ZrX1200ZrX1200 DAEG
09-16
-
ZRX1200
01-04
-
ZRX1100
98-00
-
GPZ900R
84-03
See all
KAWASAKI
-
HyperMotard 798
-
HYPERMOTARD1100/S
-
MONSTER S4R
-
STREETFIGHTER
1100
See all
DUCATI
Product detail
Valve shape: H4 (HI / LO switchable 1 light)
Power consumption: 30W
[Size]
・LED driver main unit dimensions53.5mm (length), 28.5mm (width), 16mm (thickness)
・Approximate dimensions of LED heat dissipation beltLength (from root to tip): approx. 132mm, thickness (3 pcs. per side): approx. 5mm, width: 9mm
・A: 38mm, B: 42mm, C: 81mm
A: Dimensions from upper seat to valve end (valve body dimensions)
B: Dimensions from the upper seating surface to the top of the bulb (guide for interference of the bulb with headlight shades.)
[Set components]
・1 kit
・Instruction Manual
**For lens-cut headlights, it may not be possible to create optical axes due to the lack of reproducible focus and measurement.
*For projector type headlights, the use of the projector type headlights in the hi-beam area may not produce the maximum light intensity focus.
*We have confirmed that our products meet the bike inspection standards on many test bikes, but please understand that we cannot guarantee 100% compliance with the bike inspection standards for all bikes.
*Before ordering, please make sure to check whether or not the rear of the valve interferes with the surrounding parts of the bike and confirm that the valve type is compatible with the bike.
*Please make sure that there is at least A+15mm of space for storage, taking into consideration the routing of heat dissipation belts and harnesses.
*The bulb emits high heat. To prevent LED failure due to heat buildup, please make sure that there is a margin of B+10mm or more.
*The diameter at the rear of the valve is the same as 22mm, but it generates high heat, so please consider leaving enough room around the valve when storing it.
*The vertical dimension of the LED driver does not include the wiring, so please allow at least +40mm of space for the wiring as well as for the storage space of the driver.
*Since the LED heat radiation belt generates high heat, please make sure that there is enough space in the peripheral equipment to avoid heat problems as much as possible.(The length may vary slightly depending on the product and lot conditions, so this is only a rough estimate.).
Stealth LED conversion kit for motorcycles The long-awaited release of the LED version of the Stealth HID, which has been popular for many years.
By adopting a flexible heat dissipation belt, a large-capacity natural heat dissipation environment is created, eliminating the trouble of peripheral equipment such as electric fans, and achieving better heat dissipation efficiency and ease of storage than air-cooled fin type LED headlights.
The stealth HID's greatest advantage, space-saving storage and ease of operation, has been inherited with consideration for the store floor.
While other aftermarket LED headlights often fail to pass bike inspections due to insufficient luminous intensity, Stealth LEDs have cleared the luminous intensity values required for bike inspections and have actually been proven to pass at bike inspection stations.(Depends on headlight shape and specifications)
Except for H4, 30w and 40w bulbs are lined up to meet the needs of each user, such as brightness-oriented and power consumption-oriented.
bike conformity standard inspections are tested based on clear lens / reflector type headlights.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.