P2-RS84 Rear Brake Caliper 84mm

NO NAME

Installed on: YAMAHA YZF-R1M

Excellent

Oct 20, 2022

Good

Very goodAbout quality and textureAbout the feeling of useProducts to buy togetherDifficulty of installationCost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasing

Helpful?

Changed to brembo rear brake

Very Good

Jan 30, 2022

Installed on Initial ModelGSX1300R HAYABUSA

I bought it to replace my OEM rear caliper which was getting worn out due to its age.
Caliper support for ACTIVE ( Item number:1470059SN) This was introduced in conjunction with the

If the Initial Model GSX1300R HAYABUSA is installed with ACTIVE's Caliper support, the brake hose will be positioned in such a way that it can be pimped out by the OEM mom.
However, in reality, the brake hose will interfere with the torque rod and cannot be installed in that combination.

So, in order to install the combination of this product and OEMRear master on the Initial Model GSX1300R HAYABUSA.
・Brake hose：750mm
・Adapter：20° (Both MASTER side and Caliper side)
is required

The initial model GSX1300R Hayabusa's OEM rear master has a piston diameter of 1/2.
The piston diameter of the GSX1300R HAYABUSA OEM Caliper is 2P opposed Φ38, so this product (Opposite 2PΦ34) If you replace it with (Less costly to operate) to
In general, it seems to be a good idea to replace the MASTER side with a Φ12mm.
In my case, I wanted to avoid interference between the brake pedal and exhaust pipe due to the combination of the Rear Sets and Full Exhaust System, so I decided to go with this combination, and I was right on target.

When this product is used for the rear brake of a large type car with Other Brand ProductCaliper support, it is often laid out on the lower side of the Axle Shaft.
However, in that case, the Bleeder Bolt of this product will not allow air to escape in that layout.
It is necessary to put a suitable spanner or something between the two and change the direction to release the air.

As mentioned above, it requires some ingenuity and consideration to install, but after all, it is brembo, and you will be satisfied with it.

Helpful?

Excellent

Nov 10, 2021

GSXS1000F.

I used it on my GSXS1000F with Active's Caliper support!

It was the first time to change the brake hose on a motorcycle with ABS, so it was a large struggle.
I think it's better to leave it to the shop with ABS

Helpful?

Reliable and proven brembo

Excellent

Sep 6, 2021

Used as for Front of MONKEY125 abs.
I changed from NORMAL which is relatively weak to brembo which has a good reputation for control.
MASTER and Hose are still NORMAL and phi;34Piston, so the grip is large and the expansion of the Hose is a little poor. This is my impression.
If it's a Normal master, φ32 might match better.
However, the control is much better than brembo of the trust and the achievement, NORMAL, and because it becomes the opposed Piston from One Side, the Pad also escapes to Beauty, and the resistance in the air turning can be felt that it is considerably reduced.
Above all, the brembo mark is asserted casually, and there is a dress-up effect.

Helpful?

Caliper support was made by myself because it is not specific to the car model.

Excellent

May 19, 2021

I bought this for dress-up purposes.
I wanted the bremboMark to be Red, so I painted it Red.
I bought it with the intention of making Caliper support and Spacer by myself because it is not Universal and a car model exclusive as shown in the title. I do not know whether it becomes an impression, but if it becomes a reference of the person who does not have Caliper support of the car model exclusive use.
I don't know how it feels because I haven't ridden it yet, so I give it 3 stars.