Race Category
・SUPER MOTO
・JSB1000
・ASB1000
・ST1000

for Front
Radial
Tubeless tire
TireSmall Classification:For OnRoad tire and Circuit
Compound:M3
Tire width (mm):120
Rim diameter (Inch):17
Flatness Rate (%):70
Standard Rim width (Inch):3.50
Allowable Rim width (Inch):3.50-3.75
Tread width (mm):120
Allowable Rim Width (Inch):606
ProductionJPNCompoundWAStandard Air Pressure (kPa):200
Speed Symbol:Uninstallable

**For the road racing exclusive tire, it is impossible to use in the general public road.
*Please use a tubeless rim for a tubeless tire with "FOR TUBELESS" or "TUBELESS TYRE APPLICABLE" indication. Please use a tube for the tube type rim.
*Please check the mark of the rim because inserting a tubeless tire into a tube type rim incorrectly without inserting a tube may cause "rim out" or "air leak" during riding.
*The tire on which the rotation direction designation arrow (→) in the tire side is assemble the tire according to the direction of the arrow and mount it to the vehicle.
*Please use parts that does not have damage or marked corrosion such has foreign object and scratches inside and outside part of the tire, deformation and cracks of the rim when assembling the tire.
*Please do not use tires that have trauma or rubber crack reaching the cord layer.
*Please make sure to use grease for tire when assembling the tire.
*Please adjust to 500 kPa (5.0 kgf/cm 2) or less because the pressure control valve of the air compressor might rupture the tire.
*The bead seating pressure during tire assembly should be no higher than 300kPa (3.0kgf/cm2) so please do not inject beyond this. The bead seating is a state in which the beads on both sides of the tire are equally spaced around the bead seat of the rim when assembling the tire.
*Please take safety measures such as placing the tire in the safety enclosure and then fill the air in order to avoid the risk of explosion.
*Please adjust the balance for both front and rear wheels. Please rotate freely through the shaft to adjust the tire's assembled tire, and adjust the static balance.
*Please measure the tire pressure with a cold tire before riding.
*It does not require for road racing exclusive tire. Please note that sufficient performance will not be demonstrated unless the tire temperature has risen to around 50-60 degrees.
*Please keep the tire in an upright position avoiding near from rain water, heat, oil, direct sunlight and appliances that generate electric sparks.
*It may cause cracks in the tread area by impacting and deforming at low temperature. Please avoid tire assembly especially at low temperatures.

*Please use the tire corresponding model on the publication as a reference. There are cases that it may differ from the actual mounting size. There are cases that it may vary in size depending on minor change and model, special specification vehicle and custom situation, even if the model name, displacement and year are the same. Please be sure to check the tube, size, speed symbol, load index, tire type of the tire that is actually mounted, and select size and pattern at your own risk.
*Please check with the arrow of the tread shoulder part, side wall part for the presence or absence of rotation direction.
*This tire is for competition. Please do not use on the public road.
*Please note that the product specification may change due to manufacturer reasons.
.