Brake Switch

Purchased as Repair Parts Stock

Fits:KAWASAKI 1400GTR ZGT40A [stock number]27010-0025, KAWASAKI 1400GTR ABS Genuine part number]27010-0025, KAWASAKI 250TR BJ250F [stock number]27010-0025, KAWASAKI 250TR BJ250F [stock number]27010-0025/27010-1170, KAWASAKI AR125-A AR125A [stock number]27010-1170

Japanese Webike user

Excellent

Jul 17, 2022

I bought it as Repair Parts stock. stop switch is suddenly ruined, so I stock it.

Helpful?

Very Good

Nov 21, 2020

It's okay, I think.

Has the stop-lamp light been unstable lately? I checked to see what it was, and I suspect it's the Switch or Wiring area of the front brake.
It seems that there is no problem in the energization of the wiring, is it made by OEM Alps Electric? I ordered it to see how it works because the Switch of
The next day it arrived, I was surprised, when I replaced it, the problem was solved at once.
The difference between the OEMSpec. and the OEMSpec. is that the parts around the terminals and near the terminals do not seem to be waterproofed.

If it is used as it is and there is a problem, it will be disassembled, and the contact point and the energizing part will be cleaned, and I think that Maintenance will be done.

When energizing and investigating this time, when lighting is unstable, first of all, it may be the best to suspect Switch, when it is Single Body without installing Switch, it lights without a problem, but when I operate it after it is installed and fixed, it does not light, it blinked and became unstable.
Later, I disassembled the OEM, but it seems to be a distortion of the contact point or inaccuracy, and it depends on a slight angle of Lever to energize or contact failure.
The original installed OEMSwitch is not reusable for safety reasons.

I have experience with malfunction from dirt and degradation carbonization of contacts, but it is the first time that contact failure occurs from a slight distortion of Case or current-carrying parts.
It often revives when I polish the contact points and the energized parts and put them back together again, but it is a part that needs to be operated reliably.

Helpful?

Japan User(translated)

Very Good

Feb 20, 2017

Exactly

I thought that the Front brake's switch is exclusive, but since the shape was similar, I purchased it and installed it Just size. It works without any problem.

Helpful?

Cheaper than OEM Parts Number

Japan User(translated)

Excellent

Nov 8, 2015

Since the Brake lamp of the Front brake has stopped running, it will be replaced.

Just Wie Big was in Sale, so I was able to purchase it cheaply.
The shape was the same as the OEM Parts Number that was originally installed, and the price was cheaper than the OEM Parts Number.

We have stock in Big, so it arrived immediately at hand.
Parts exchange was done soon.

Helpful?

It was an initial defective item

Japan User(translated)

Average

Sep 4, 2015

Since the switch originally attached to KLX 250 has become unstable due to poor contact, exchange with the same one.
After installing and checking the operation, running to the nearby Convenience, I got Lever but got stop-lamp.

When I removed the Switch and disassembled, the inside board Spring was broken.
As Manufacturer adopted products are reliable I think that Regular's initial defective product.

Since it can not be helped, I purchased another one..