Parts required for water bottle installation. I like this because it has adjustable angles. The material is also excellent.
View Detail
Looks like you access from European region.
Would you shop at webike.eu.com?
Looks like you access from European region.
Would you shop at webike.eu.com?
11.9 ~ USD (1,897 JPY)
Delivery Information
Please select product form first.
[Logo colors]
・BH-100-S model: Red
・BH-100-M model: Black
[Product Code]
・BH-100-S model: 339-3100-00
・BH-100-M model: 339-3110-00
[Material] Aluminum, Stainless steel
[Weight]
・BH-100-S model: 79g
・BH-100-M model: 80g
[Maximum holdable weight] Up to 300g
[Mountable size (diameter)]
・BH-100-S model: Diameter 22-29mm
・BH-100-M model: Diameter 28-35mm
[Components]
・2 bolts for mounting the bottle cage
・Transparent sheet
**For the quick clamp, first adjust the clamping force with the adjustment screw at the base of the clamp to obtain the appropriate clamping force, and then turn down the locking lever.The holder can be installed by tightening the screw after the lever is turned down, but the tightening torque is not sufficient and the holder may hang down during use.
*Make sure that the adjustment bolt is fully retracted into the holder body when the lever is clamped.If the bolt is still floating, it is not clamped firmly.
*When raising the lever, operate it with your finger, not with your fingernail only.The lever is closed with a strong force, which may injure your fingernail.
*To change the angle of the bottle cage, it is necessary to loosen the bolt on the central axis of the holder.If the bottle cage is made by MINOURA, you can adjust it while it is installed, but if the bottle cage is made by another company, you have to remove the bottle cage.
*On drop bars for road use where the brake and shift wires are installed along the handlebar, the clamp may apply excessive force to the cable and crush the outer cable.It is advisable to avoid the cable as much as possible.
*This product cannot be installed on handlebars or seat posts with a non-circular cross-section.
*The tool (M3 Allen wrench) to change the direction of the clamp and the angle of the bottle cage is not included.A portable Allen wrench cannot be used because of the structure.Use a regular L-wrench.
*We are not responsible for the theft of equipment while parked due to the ease of removal.When you park your bike, please remove it and take it with you.
*Bottle cage is not included.
*To prevent scratches and ensure sufficient clamping force, wrap the supplied transparent sheet around the handlebar and install the BH-100 on top of it..