Black Cover Water Resistant Light LL

Used on previous generations of Motorcycle (XL1200X, ZX-25R, Z900RS). I have used it for about 2 years and there are no tears or fraying. It is also highly water-resistant, and in the beginning there was almost no leakage (after 2 years, it starts to soak a little). I think this durability is very cost effective at this price.

It is quite itchy.
Of the several features, my favorite is the color coding of the lockhole Slit to easily identify the front and back. Also, the wind protection. I deal with it by squeezing the Belt at the bottom of the vehicle and the String turned around the entire bottom. The Surface Fastener, which holds together the String that has become longer by pulling, is very useful.
I have been using it for a year. No problems at all.

Used on GSX-R1000R 2022
I used to use the L Size on my GSX-R750 2011, but the rear tire was sticking out due to the lack of height in the back, so I had to go up one size.

In terms of size, as you can see in the picture, it can cover the rear wheels well.
But overall, the front is a bit too much and the back is quite limited.
It would be nice to have the Size of the recent Full Cowlfor Vehicle.

For the attached Heat Seat, I installed the Cover once, and checked where the Silencer would hit, and marked the four corners.
I turned the cover over and pasted it using the marking position as a reference.
I think the OEMSilencer on the R1000 is on the large side, but I was able to cover it well enough.

I replace the Motorcycle Cover every time I inspect my car.
The color was faded but not damaged, so I don't think durability will be a problem.

Last time I bought one for my KTM DUKE200, I was convinced it was too good to be true.

https://imp.webike.net/article/513016/

I bought a new 250cc class motorcycle, so I had to buy a new Cover.

The KTM is 2029mm, 836mm wide, 1267mm tall, with a GIVI 48L top case... "Standard 3L." The Cover is a little short at the bottom but a little long at the front and back, so the Tire is good because it manages to hide more than half of the slack room!

The additional car is 2005mm, 785mm wide, 1030mm high, and has a great Windscreen instead of a small one, and it has a 48L Top case, so it doesn't need length, but it needs height, so I chose LL length rather than 3L to cover the Top case. here

Top case for Vehicle LL I will update the Foot feeling including the feeling of use later.

This is the third time I've bought one of these.
This product is one of the best waterproof motorcycle covers on the market.
I think it's pretty cosy overall.
I'm happy with the Waterproof performance as you can tell from my third purchase.
Durability is 2 years in my case with no problems at all, other than performance.
Also, the color black is very good and it is not noticeable at all at night, so you can feel safe because of the security effect.
The rear hem ties are one of the large points that I love about this Motorcycle Cover.
I don't feel the need to fix it with the BuckleBand in Center unless it's a strong wind because I can easily hem it and fix the excess cord with Magic tape.
The holes for the Tire Lock are also a different color to make it easy to identify the front and rear of the Cover, and the holes are not bracketed, which is a common problem with cheap products, so you don't have to worry about damaging your motorcycle.
There is a ventilation system on both sides of the mirror.
The sticking Seat for Exhaust System heatproof is attached, but...
In the first place, I don't do the cover until it cools down because I don't want moisture to accumulate in the cover by heat while the engine and exhaust system are hot.
So I guess it's unnecessary. I'd be more than happy to lower the price for it. (Lol) 。
I think that it is a good Cover that goes satisfactory in function, durability, ease of use, price, and the total while there are various Cover that are expensive even if there is an effect from a cheap thing that goes bad immediately.
Recommendation.