This is Suzumbo's Seal set, which is often used for other purposes.
The Suzumbo Caliper was introduced around 2013, and since the part numbers have not changed between the original Suzumbo Caliper Seal set and the current Suzumbo Caliper Seal set, it appears that the Seal has not changed until the time of posting the impressions.
(New ModelGSX1300R HAYABUSA's is not confirmed yet)
After 2 years and 15,000 km of use, there is enough room to reuse the product during OH.
In fact, I have reused it and had no problems.
The service manual says it cannot be reused, so if you decide to do it on your own, it is your responsibility.
After all, the Merit of OEM brembo is that Repair Parts are available like this.
The Brembo calipers that are sold as custom parts are often not available in sealed sets, so you basically have to outsource the OH work.
Or, you can get a dubious ThirdParty product on Yahoo! Japan, or you can check the compatibility of the repair parts of the Prenvo Caliper, which is used by many OEM companies, and divert them.
So, I don't know if it can be used for Custom parts brembo, but I'll mention the information of this product for reference.
Please do not use this product for any other purpose.
Compatible Piston Diameter:Φ32
Oil seal thickness:approx. 3.2mm
Oil seal cross section:ordinary square (Not a trapezoid).
Dust Seal thickness:approx. 2mm
Dust seal cross section:with grooves on the inside
This is a Brake part, so if you have any concerns, leave any work that requires this product to the store.
Even if you do it yourself, be sure to check it carefully at low speed afterwards, and periodically check for problems.
Looks like you access from European region.
Would you shop at webike.eu.com?
