Looks like you access from European region.
Would you shop at webike.eu.com?
113.46 ~ USD (18,088 JPY)
Delivery Information
Please select product form first.
Shield thickness: 3mm
Shield body: polycarbonate
[SIZE]
LENGTH: 150mm
WIDTH: 250mm
DEPTH: 80mm
Stainless steel screw
Polycarbonate Washers
Lock nut adopted
*
*The color of the mounting bracket is Black (powder coating) .
*There is no space or hole for ETC or other accessories on the mounting bracket..
* The image is only for reference. The image shown may differ from the actual product.
Knuckle guard to protect rider's knuckles and fingertips from the wind.
The shield body is made of polycarbonate, and the color can be selected from clear and smoke.
The bracket is designed to be strong enough to prevent rattling even under high wind pressure, and is designed to be bolted on to the left and right mirrors.
Smoke Windshield Version
・The bracket shape is designed to fit the mirror holder and is easily bolted on to the mirror.
・On the brake side, the bracket is bent along the mirror holder to prevent the mirror from turning.
■Windshield
・Simultaneous installation with "Bikini Cowl" It is designed to be installed with "Guyra Shield", "Road Comet" and "Road Comet 2" by Chic Design.
It is recommended for those who want to further improve the windproof performance.
■Guyra Gauntlet
Knuckle shield to protect rider's knuckles and fingertips from the wind.
Guyra means a suit of armor, and a gauntlet is a piece of Western armor that protects the arm from the fingertips.
It is the only aero-protection that protects the rider's fingertips, which are the armor worn on the bike and require delicate operation.
The shield body with complex curved surface is made of durable 3mm thick polycarbonate.
The high transparency does not spoil the lightness of the handlebar area.
Chrome-plated or black-painted mounting brackets with sufficient strength designed for each model.
The shape is designed to prevent rattling even when subjected to high wind pressure, and is designed to bolt on to compatible vehicles.
A highly durable stainless steel screw, polycarbonate washer and lock nut are used for shield installation.
The design that does not compromise the balance of the vehicle
The handle guard body has a depth of 80mm to provide clearance around the lever without feeling cramped.
In addition, the shape that wraps around the bottom of the lever has windproof performance not only in the fist but also in the fingertips.
Specially designed cut lines are provided for each model to maximize wind protection.
■Easy bolt-on design to mirror holder
Installation is quick and easy as it only needs to be tightened together with the left and right mirrors.
The mounting bracket is specially shaped to fit the brake and clutch area of each vehicle and also serves as a stopper.
Therefore, even though it is a single point fastening, it achieves a robust fixation.
This product is designed to be installed on a stock vehicle, so if you have made any changes to the handlebar, such as to the master cylinder, you may not be able to install this product or you may not be able to get the sufficient windproof effect.
■Select clear or smoke according to your preference.
The clear specification gives a fresh impression without losing the lightness of the handlebar, and the smoke specification gives a tighter impression by increasing the presence of the gauntlet.
■In case of having made the change around the handlebar,
If you have modified the front brake hose or other parts around the handlebar, the brake hose may interfere with the gauntlet depending on the fixing direction.
■If your model is not in the lineup
The models listed above have been tested and confirmed by Chic Design.
If your model shares the same parts around the handlebars as the models in the current lineup, it may be possible to install it even if your model is not in our lineup.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Reviews with image
Fits:SUZUKI GSX1400 01-08
Jan 10, 2021
I bought it because I could not stand the strongest cold wave. When I put it on, it didn't look as bad as I thought it would, and I was more than satisfied with the Large effect. The cold wind hitting the fist is reduced, and I think that this is Large sturdy even without Grip heater. It is easy to install and remove, so I recommend it to riders who ride in the middle of winter.
View Detail
Fits:SUZUKI GSX1400 01-08
Nov 29, 2010
They are comment which it was filled with in winter and have carried out the pre- last run.
Since the wind entered from the sleeve before following Colet, the sleeve had been extracted, but when attached, even if it was opening the sleeve, cold was not felt at all.
Whether it is different like this and surprise.
Although a price will be carried out so so, attachment is also well easy to be settled at the attachment stay ordered for exclusive use the whole vehicle type.
Since it also becomes a wind pressure to a hand, and a stepping stone and the measure against an insect attack, in a direction especially with much touring, it is recommended.
Fits:YAMAHA SR400 10-21
May 27, 2022
I bought it for winter protection in the Kanto area and never froze when used with winter Gloves, which are not that thick.
Installation is also easy, as long as the RightMirror is co-tightened with the Mirror and the RightMirror has an Opposite Thread Screw.
The Bracket is solid and the Screen is strong enough to touch.
As is the fate of the SR400, the engine vibration is fine but shaky.
Fits:SUZUKI
Aug 11, 2020
It is a necessity in the middle of winter, but it cannot be surpassed by this alone. After that, Grip heater installation. Still cold, Komine electric heat Gloves device. It's still cold. It looks like the image of the armor. But I can't repair the damage if I stumble on it. If you buy the AcrylicGuard part cheaply, you may be able to fit it to any type of armor. However, in winter, in order to change into Long Screen of SEA BASSOEM Product, if you cut all the Handlebar as much as possible, it will hit Screen. You may need longer bolts to remove the Handlebar and fit it back in. Also, please make sure to periodically retighten the Acrylic and Handlebar parts to prevent them from coming loose.
View DetailFits:HONDA X4 97-03
May 10, 2020
Handlebar, Mirror, etc... not OEM, so it interferes with things a bit So I tried to add the Nut and it became good However, the Screen [Color] It's Smoke [Color] I bought Clear [Color] I repurchased Smoke
View Detail
Review detail
